This seamless 3D texture features a vibrant striped pattern rendered on polypropylene, a durable polymer widely used in modern plastic furniture. Its base substrate is a high-quality, injection-molded polypropylene sheet, enhanced with specialized pigments that deliver intense, vivid colors arranged in clean, alternating stripes. The glossy finish is achieved through a polished surface layer, providing a smooth, reflective coating that accentuates the colorful stripes with subtle highlights and sharp reflections. This finish mimics the factory-new look of premium furniture plastics, combining scratch resistance and weathering durability to maintain its lively appearance over time.
In terms of material composition, the texture simulates the polymer’s fine grain structure and minimal porosity, typical of injection-molded plastics. The binders and additives ensure color stability and surface hardness, which together contribute to the photorealistic quality seen in the PBR channels. The BaseColor (Albedo) channel captures the bright, saturated stripes with precise color separation. The Normal map conveys the slight surface undulations and micro-texture of the plastic, enhancing realism. Roughness is finely tuned to represent the glossy, smooth finish with minimal diffuse scattering, while the Metallic channel remains near zero, reflecting the plastic’s non-metallic nature. Ambient Occlusion subtly enhances depth in creases, and the Height/Displacement map adds gentle surface relief to emphasize the striped pattern’s dimensionality.
Rendered at an impressive 8K resolution, this texture is optimized for high-fidelity visualization in Blender, Unreal Engine, and Unity, ensuring crisp detail even on close-up shots or large surfaces. Its seamless, tileable design allows for flexible UV mapping without visible repeats, making it ideal for contemporary furniture projects that demand bold, decorative plastic surfaces. For best results, users are advised to adjust the roughness slightly depending on lighting conditions to fine-tune the level of gloss and reflection, or to scale the UVs carefully to maintain the stripe pattern’s visual impact without distortion.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
