This high-quality seamless 3D texture showcases a corrugated plastic furniture surface made from durable ABS plastic, known for its excellent rigidity and lightweight polymer composition. The material’s distinctive wavy ribs and linear corrugation patterns are enhanced by carefully engineered grain orientation in the plastic substrate, creating a tactile and realistic surface appearance. The vibrant colors are achieved through advanced pigmentation techniques, embedding rich dyes directly into the ABS polymer matrix to ensure long-lasting, fade-resistant hues. A glossy finish is applied to the surface, producing a polished and reflective sheen that highlights the curved forms and accentuates the shiny reflections typical of high-gloss plastic furniture elements.
In terms of PBR (Physically Based Rendering) channels, this texture excels with its 8K resolution, offering extreme detail suitable for photorealistic rendering in Unreal Engine, Blender, and Unity. The BaseColor/Albedo map captures the vivid vibrant colors without artificial saturation, while the Normal map defines the intricate corrugated ribs and subtle plastic grain, adding depth and surface complexity. The Roughness map is finely tuned to represent the glossy surface’s smoothness and reflective qualities, producing sharp highlights and accurate light dispersion. The Metallic channel remains minimal, reflecting the polymer’s non-metallic nature, while the Ambient Occlusion and Height/Displacement maps simulate realistic shadows and surface undulations, enhancing the dynamic forms and curvature of the furniture texture.
This seamless texture is ideally suited for dynamic furniture designs that require bright, textured plastic surfaces with a polished finish. It works particularly well on curved or contoured models where the interplay of light and shadow on the gloss finish can be fully appreciated. For best results, it is recommended to adjust the UV scale to maintain a natural appearance of the corrugation pattern and fine-tune the roughness parameter to balance between subtle gloss and strong reflections, depending on lighting conditions and artistic intent. The high resolution ensures crisp details even in close-up renders, making it an excellent choice for product visualization, architectural visualization, and virtual staging projects that demand realistic, high-quality materials.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
