This seamless 3D texture in stunning 8K resolution presents sticky water droplets clinging to a fabric surface with remarkable realism. The base material is a finely woven organic textile, where individual fibers create a subtle, natural grain and microtexture that enhances surface complexity. Moisture adheres strongly to these textile fibers, forming clustered droplets that exhibit authentic wetness and a delicate sheen. The fabric’s surface finish appears slightly glossy due to moisture reflection, while the binders and adhesives within the textile matrix contribute to the droplet retention and distribution patterns. Colorants are subtly embedded in the fibers, producing a soft, natural hue that interacts with light realistically across BaseColor and Albedo channels, emphasizing the wet fabric’s visual depth and complexity.
In the PBR workflow, this texture excels by capturing nuanced material properties across multiple channels. The Normal map intricately details the fine fiber orientation and the raised droplets, creating convincing micro-relief effects. The Roughness channel balances smooth, wet highlights on the droplets with the slightly textured fabric beneath, simulating natural moisture diffusion and wetness effects. Metallic values remain low, as the organic textile surface lacks metallic components, while Ambient Occlusion enhances depth perception around fiber clusters and droplet bases. Height and Displacement maps highlight subtle elevation differences between the fabric weave and droplet volumes, further enhancing realism in close-up renders.
Optimized for use in Unreal Engine, Blender, and Unity, this seamless 8K PBR texture ensures high fidelity in photorealistic 3D renders requiring authentic wet fabric appearances with sticky droplet behavior. The ultra-high resolution preserves intricate details even under extreme close-ups, making it ideal for visualizations where texture quality is paramount. When applying this texture, adjusting the UV scale to maintain natural droplet size and tuning roughness values can further refine the wet fabric effect, ensuring the droplets reflect light accurately without appearing overly glossy or matte.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
