This seamless 3D PBR texture at an impressive 8K resolution masterfully depicts a dynamic droplet splash on a natural stone surface, delivering photorealistic detail ideal for high-end 3D renders. The base material is a rugged mineral-rich stone substrate characterized by subtle grain orientation and natural porosity, which influences the adhesion and distribution of water droplets. The surface finish reflects a slightly weathered yet polished stone, where microtexture variations form intricate ripple and splash effects. Colorants arise from natural oxide layers within the stone, providing realistic earthy hues and subtle tonal shifts that enrich the BaseColor (Albedo) channel with varied, authentic stone coloration. This natural complexity is essential to achieving lifelike wetness and surface interaction in renders.
In terms of PBR channel composition, the Normal map captures every minute bump and ripple formed by the droplet impact, enhancing depth and surface irregularities. The Roughness map balances smooth wet areas with matte, dry stone patches, creating convincing wet surface shine and subtle reflections without metallic gloss, as indicated by the fully non-metallic Metallic channel. Ambient Occlusion emphasizes crevices and micro-shadows around droplets, reinforcing spatial realism. The Height (Displacement) map accentuates splash elevation and droplet contours, enabling enhanced parallax effects when applied. Together, these channels provide a comprehensive material definition optimized for physically accurate rendering.
This texture is fully optimized and Unreal, Blender, and Unity ready, ensuring smooth integration into real-time and offline workflows. Its seamless nature permits unrestricted tiling without visible seams, making it perfect for outdoor and architectural visualization where natural wet stone surfaces are required. For optimal results, it is recommended to carefully adjust UV scale to maintain natural droplet sizes and to fine-tune roughness values slightly to control wetness intensity and reflectivity. Utilizing the Height map for parallax or displacement can significantly boost realism in close-up renders, bringing the dynamic droplet splash to vivid life on stone surfaces.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
