This seamless 3D texture showcases a dimpled surface characteristic of injection molded plastic, rendered in ultra-high 8K resolution for exceptional detail and realism. The base material is a durable polymer substrate, engineered for impact resistance and long-lasting performance in furniture applications. Its matte finish is achieved through precise control of surface roughness during the molding process, creating a soft touch and a naturalistic, earth tone color palette. Fine grain orientation and subtle porosity contribute to the texture’s tactile complexity, while colorants such as mineral-based pigments ensure consistent, fade-resistant hues across the entire surface.
In physically based rendering (PBR) workflows, this texture excels by delivering comprehensive channel data designed for photorealistic results. The BaseColor (Albedo) channel presents the muted, matte earth tones with realistic pigment dispersion, while the Normal map captures the intricate dimpled pattern and subtle grain details that define the injection molded finish. The Roughness map controls the soft, non-reflective surface quality, balancing light diffusion for a naturally subdued gloss level. This texture features minimal Metallic values, appropriate for plastic materials, and the Ambient Occlusion channel enhances depth perception by simulating realistic shadowing within the dimples. Height or Displacement maps further accentuate the tactile relief, supporting advanced parallax effects for enhanced visual fidelity.
Engineered for seamless tiling without visible edges, this texture is optimized for use in Blender, Unreal Engine, and Unity, making it ideal for realistic 3D visualizations of plastic furniture components or similar molded products. Its robust material composition and detailed surface features allow for versatile applications including product design, architectural visualization, and virtual prototyping. For practical deployment, adjusting the UV scale to maintain the natural dimple frequency is recommended, while fine-tuning roughness values can help achieve the perfect balance between subtle sheen and matte softness depending on lighting conditions and scene requirements.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
