This seamless 3D texture showcases weathered wood characterized by a sun bleached, naturally aged surface that evokes a soft, faded appearance with subtle cool tones. The base substrate is authentic wood featuring visible grain orientation and natural porosity, enhanced by years of exposure to sunlight and environmental conditions. The clear finish layer acts as a protective coating that preserves the intricate wood pores and organic texture while providing a smooth, slightly glossy surface. This finish highlights the nuanced interplay between weathering and wood fibers, capturing the delicate balance of roughness and polish found in outdoor-aged timber.
In the physically based rendering (PBR) workflow, the 8K resolution texture excels in delivering photorealistic detail across all material channels. The BaseColor (Albedo) map accurately represents the sun bleached pigments and subtle discoloration from oxidation and UV exposure. The Normal and Height maps emphasize the fine grain structure and surface irregularities, enhancing depth and realism in 3D environments. Roughness is finely tuned to reflect the combination of weathered matte areas and the smooth clear finish, while the Metallic channel remains minimal to reflect the organic, non-metallic nature of wood. Ambient Occlusion adds soft shadows in the crevices of the grain, further grounding the material in realistic lighting scenarios.
This texture is fully seamless, enabling flawless tiling on any geometry without visible repetition or seams, making it ideal for environmental assets, furniture modeling, and architectural visualization. At 8K resolution, it provides exceptional clarity and detail, perfect for high-end renders and close-up shots in Blender, Unreal Engine, and Unity. For optimal results, it is recommended to adjust the UV scale carefully to maintain the natural wood grain proportions and to experiment with roughness values to match the desired level of weathering or gloss, depending on the scene lighting and material context.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
