This seamless 3D texture showcases a detailed composition of rustic fireplace bricks, expertly crafted to capture the authentic mineral-based ceramic substrate typical of traditional hearth masonry. The bricks exhibit natural aggregates and grain orientation formed through weathering, with subtle porosity that contributes to a tactile roughness. The surface finish balances a mildly brushed, matte appearance with areas of oxidized soot and ash deposits, enhancing realism. Warm iron oxide pigments create rich, earthy red and brown hues, while scattered yellow and gold colorants simulate the fire glow’s radiant warmth. Adhesive mortar joints are subtly visible, adding depth and structural coherence to the overall material.
Rendered in ultra-high 8K resolution, this PBR texture integrates expertly across BaseColor (Albedo) for true-to-life brick tones, Normal maps that emphasize the rugged surface irregularities and mortar relief, and Roughness channels finely tuned to reflect the varying light absorption between matte bricks and slightly glossy, heat-exposed patches. The Metallic channel remains minimal, consistent with non-metallic ceramic bricks, while Ambient Occlusion enhances shadowing within crevices and between bricks for added depth. Height and Displacement maps capture the unevenness of weathered masonry, ideal for realistic parallax effects in real-time engines. The texture is fully optimized and ready for seamless tiling in Blender, Unreal Engine, and Unity, supporting high-fidelity interior visualizations.
Designed specifically to evoke the cozy and inviting ambiance of a crackling fireplace with glowing embers, this texture is perfect for holiday and Christmas scenes requiring photorealistic warmth and atmosphere. The interplay of warm fire glow and twinkling yellow highlights conveys radiant heat and comfort, enhancing winter interior designs or hearth-centric environments. To maximize realism, adjusting the UV scale to match actual brick dimensions ensures proper detail alignment, while fine-tuning roughness values can simulate soot buildup or recently cleaned surfaces depending on the scene’s mood.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
