This seamless 3D texture features a high-quality brushed plastic surface made from ABS plastic, a durable thermoplastic polymer widely used in furniture manufacturing. The material's composition includes fine polymer chains with embedded pigments that create a consistent semi matte finish, reducing glare and reflections while showcasing distinct linear brush strokes typical of brushed plastic surfaces. The anti fingerprint coating is a functional treatment applied as a thin protective layer, designed to minimize visible marks and smudges, preserving the clean aesthetic of the furniture piece. Subtle plastic grain and evenly spaced linear patterns add natural depth and tactile realism, simulating the microscopic irregularities found in actual ABS plastic parts with a brushed finish and rounded edges.
In terms of PBR channel mapping, the BaseColor (Albedo) captures the muted, slightly warm tone of ABS plastic with its characteristic subtle sheen. The Normal map enhances the fine grain and directional brush strokes, providing realistic surface texture without altering geometry. Roughness values are carefully balanced to achieve a semi matte finish, reflecting light softly while avoiding glossy highlights. The Metallic channel remains near zero, consistent with non-metallic polymer materials. Ambient Occlusion accentuates crevices and rounded edges, adding visual depth, and the Height/Displacement map subtly emphasizes the brushed surface’s linear patterns for enhanced parallax effects. This texture is delivered in an ultra-high 8K resolution, ensuring crisp detail at close range and optimized for seamless tiling across large furniture surfaces.
Designed with modern workflows in mind, this texture is fully Unreal Engine, Blender, and Unity ready, making it ideal for photorealistic furniture visualization, product rendering, and architectural visualization projects requiring precision and realism. When applying the texture in 3D software, it is recommended to carefully adjust the UV scale to maintain the proportional appearance of the linear brush strokes, preventing distortion. Additionally, fine-tuning the roughness map can help achieve the perfect balance between fingerprint resistance and subtle reflectivity, enhancing the semi matte effect while preserving the authentic ABS plastic look.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
