This seamless 3D texture showcases a high-quality textured plastic surface designed specifically for furniture applications, featuring a sophisticated rubberized coating that delivers a soft touch finish. The base material is a polymer plastic substrate, enhanced with finely blended binders and micro-scale aggregates that contribute to its durable yet pliable nature. Earth tones pigments are intricately layered within the plastic matrix, creating a warm, natural palette with subtle variations that mimic real-world materials. The surface finish exhibits a finely pebbled texture combined with micro bump details, simulating the typical tactile and grip-enhancing qualities of rubberized coatings found on premium furniture components. Rounded edges and a flat profile further enhance the realistic appearance and functional ergonomics of this texture.
Rendered at an impressive 8K resolution, this PBR (Physically Based Rendering) texture provides exceptional detail and fidelity for use in high-end 3D models. The BaseColor (Albedo) channel accurately reflects the earth tones and subtle pigment variation, while the Normal map captures the micro bump and pebbled surface geometry, adding realistic depth and tactile complexity. The Roughness map defines the soft, matte finish characteristic of rubberized coatings, delivering a balanced reflectivity that avoids unwanted glossiness. The Metallic channel remains minimal as expected for plastic materials, while the Ambient Occlusion enhances crevices and edge definition to improve realism. Height/Displacement data further emphasizes the nuanced surface relief, making the texture ideal for close-up renders.
Optimized for seamless tiling and fully compatible with major platforms such as Blender, Unreal Engine, and Unity, this texture is a versatile asset for designers crafting soft-touch plastic furniture surfaces. For best results, adjusting the UV scale to appropriately match furniture dimensions ensures the fine details remain visible without distortion. Additionally, fine-tuning the roughness value can help balance the softness of the rubberized coating against environmental lighting, enhancing the tactile appeal in interactive or photorealistic scenes.
How to Use These Seamless PBR Textures in Blender
This guide shows how to connect a full PBR texture set to Principled BSDF in Blender (Cycles or Eevee). Works with any of our seamless textures free download, including PBR PNG materials for Blender / Unreal / Unity.
What’s inside the download
*_albedo.png — Base Color (sRGB)*_normal.png — Normal map (Non-Color)*_roughness.png — Roughness (Non-Color)*_metallic.png — Metallic (Non-Color)*_ao.png — Ambient Occlusion (Non-Color)*_height.png — Height / Displacement (Non-Color)*_ORM.png — Packed map (R=AO, G=Roughness, B=Metallic, Non-Color)
Quick start (Node Wrangler, 30 seconds)
- Enable the addon: Edit → Preferences → Add-ons → Node Wrangler.
- Create a material and select the Principled BSDF node.
- Press Ctrl + Shift + T and select the maps
albedo, normal, roughness, metallic (skip height and ORM for now) → Open.
The addon wires Base Color, Normal (with a Normal Map node), Roughness, and Metallic automatically.
- Add AO and Height using the “Manual wiring” steps below (5 and 6).
Manual wiring (full control)
- Create a material (Material Properties → New) and open the Shader Editor.
- Add an Image Texture node for each map. Set Color Space:
- Albedo → sRGB
- AO, Roughness, Metallic, Normal, Height, ORM → Non-Color
- Connect to Principled BSDF:
albedo → Base Colorroughness → Roughnessmetallic → Metallic (for wood this often stays near 0)normal → Normal Map node (Type: Tangent Space) → Normal of Principled.
If details look “inverted”, enable Invert Y on the Normal Map node.
- Ambient Occlusion (AO):
- Add a MixRGB (or Mix Color) node in mode Multiply.
- Input A =
albedo, Input B = ao, Factor = 1.0.
- Output of Mix → Base Color of Principled (replaces the direct albedo connection).
- Height / Displacement:
Cycles — true displacement
- Material Properties → Settings → Displacement: Displacement and Bump.
- Add a Displacement node: connect
height → Height, set Midlevel = 0.5, Scale = 0.02–0.08 (tune to taste).
- Output of Displacement → Material Output → Displacement.
- Add geometry density (e.g., Subdivision Surface) so displacement has polygons to work with.
Eevee (or lightweight Cycles) — bump only
- Add a Bump node:
height → Height.
- Set Strength = 0.2–0.5, Distance = 0.05–0.1, and connect Normal output to Principled’s Normal.
Using the packed ORM texture (optional)
Instead of separate AO/Roughness/Metallic maps you can use the single *_ORM.png:
- Add one Image Texture (Non-Color) → Separate RGB (or Separate Color).
- R (red) → AO (use it in the Multiply node with albedo as above).
- G (green) → Roughness of Principled.
- B (blue) → Metallic of Principled.
UVs & seamless tiling
- These textures are seamless. If your mesh has no UVs, go to UV Editing → Smart UV Project.
- For scale/repeat, add Texture Coordinate (UV) → Mapping and plug it into all texture nodes.
Increase Mapping → Scale (e.g., 2/2/2) to tile more densely.
Recommended starter values
- Normal Map Strength: 0.5–1.0
- Bump Strength: ~0.3
- Displacement Scale (Cycles): ~0.03
Common pitfalls
- Wrong Color Space (normals/roughness/etc. must be Non-Color).
- “Inverted” details → enable Invert Y on the Normal Map node.
- Over-strong relief → lower Displacement Scale or Bump Strength.
Example: Download Wood Textures and instantly apply parquet or rustic planks inside Blender for architectural visualization.
To add the downloaded texture, go to Add — Texture — Image Texture.
Add a node and click the Open button.
Select the required texture on your hard drive and connect Color to Base Color.
